Misc
  • My Airplane
  • Tools

    • Tailcone construction photos

    Saturday, February 20 2010

    Initial build up of the tailcone Once the right side skin is drilled and clecod, the whole assembly is filopped back over. I put it on my table. Taiilcone from the front clamping the aft deck, and setting alignment. close up of enlarged hole Top hole, inlarged, drilled off center. Bad. aft top skin attached to skin stiffeners. The stiffeners will be riveted to the skins here. I plan on leaving the skin like this for this step so I can have access to both sides by myself Bucking rivets with my Father-In-Law Bucking rivets with my Father-In-Law

    Tagged as: , ,